Packaging is changing across the EU, and for brands selling packaged products into the European market, there is quite a lot to get to grips with.
The EU Packaging and Packaging Waste Regulation (PPWR), Regulation (EU) 2025/40, introduces a series of changes intended to reduce packaging waste and improve rates of recycling and reuse. These range from new documentation requirements to much bigger changes around recyclability, recycled plastic content and packaging design as we move towards 2030.
Some requirements are already defined. Others are still being developed.
And that distinction is important.
PPWR is now part of the regulatory landscape, but some of the criteria that will ultimately determine whether packaging can remain on the EU market from 2030 are not expected to be confirmed until 2028.
So, what should brands have on their radar now?
Table of Contents
PPWR and packaging compliance
One of the immediate areas to understand is documentation.
The substance-of-concern limits applying to packaging are not new. PPWR carries forward the existing limits from the previous Packaging Directive. What changes is the requirement to evidence compliance.
The regulation requires packaging to have a declaration of conformity to Regulation (EU) 2025/40 before being placed on the EU market, supported by the relevant technical documentation.
That documentation can include packaging identification, materials of construction, design and manufacturing information, risk assessments and test results. Importantly, the declaration needs to identify packaging by type and batch; a generic statement covering all packaging is not sufficient.
For brands, that makes understanding where your packaging documentation comes from and who is responsible for what increasingly important.
We go into the documentation flow, responsibilities across the supply chain and what Herrco can provide in our full PPWR overview.
Access our 2026 PPWR Overview.
Packaging recyclability becomes a market-access issue
For us, this is one of the biggest changes brands should be thinking about when making packaging decisions today.
From 2030, only packaging achieving recyclability grades A–C will be permitted to remain on the EU market. From 2038, grade C is also due to be excluded, leaving grades A and B.
The complication? The detailed recyclability criteria are still in development and are expected to be published during 2028.
That means nobody can say with certainty today exactly how every component will grade.
What we can do is start looking at packaging through the lens of recyclability. We would expect obviously multi-material components, such as aluminium-collared caps or pumps containing metal springs to be more challenging under the future grading system. Mono-material components, such as a 100% HDPE bottle, are better positioned for the higher grades. This remains an expectation rather than a confirmed grading outcome until the criteria are published.
For brands planning products with a long lifecycle, 2030 isn’t necessarily as far away as it sounds. Packaging developed now could still be on the market then.
Recycled plastic content is another 2030 consideration
PPWR also introduces minimum post-consumer recycled (PCR) content requirements for plastic packaging.
The current position set out in our overview is a 30% minimum PCR content in contact-sensitive plastic packaging from 2030, with the minimum likely to increase from 2038; the exact later figure remains to be confirmed.
There is an important distinction here: PIR (post-industrial recycled) material is specifically excluded from these calculations and cannot substitute for PCR content.
The PCR itself must also comply with the relevant substance limits and be covered by a declaration of conformity.
This is an area where forward planning matters. Sourcing suitable compliant PCR at the required levels will take lead time, particularly for products expected to remain on the market in 2030.

Labelling will need space too
Packaging artwork is also likely to be affected.
The EU is expected to introduce a harmonised recyclability labelling system, with mandatory requirements expected during 2028-29, although the exact date is still to be confirmed.
The system is expected to include recycling-stream information on finished products, together with reusability guidance and deposit-and-return information where relevant, likely using pictograms. QR codes providing more detailed sorting instructions may also be required from 2029, although this is still to be confirmed.
So if you’re redesigning packaging between now and 2028, it makes sense to start thinking about label real estate rather than creating a pack that leaves very little room for future requirements.
Supplying hotels? There is another significant change
There is also a very specific PPWR requirement for brands supplying hospitality.
From 1 January 2030, small-volume toiletries of 50ml or less offered in hotels and similar accommodation will be banned from the EU market.
Hotels are expected to move towards larger-volume and likely refillable alternatives. For brands supplying this sector, this is one of the clearest future changes to start planning around.
What can brands begin doing now?
There is still plenty of detail to come, so we don’t think the answer is to make assumptions about requirements that haven’t yet been confirmed.
But that doesn’t mean doing nothing.
For new product developments, we would already be considering packaging that is as recyclable as possible, favouring mono-material formats where the product and format allow.
For existing products, it’s worth starting to identify packs or individual components that may eventually need redesigning or replacing.
And if you’re manufacturing with us, tell us where your products are being sold. PPWR applies to packaging placed on the EU market, so destination matters.
There is a lot more detail behind each of these changes.
We’ve put together our full PPWR 2026 Overview – an easy guide for brands, covering the timeline through to 2040, responsibilities across the supply chain, declarations of conformity, documentation flows, worked examples, recyclability, PCR content, labelling, common questions and some of the practical challenges we’re already working through with packaging suppliers.
If you’re unsure how PPWR could affect a specific product, packaging format or future development, speak to our team and we’ll look at it with you.
This article and the Herrco PPWR Overview are provided for information and do not constitute legal advice or a declaration of conformity.

